Scotsman Training - Bloomington
2018-12-04 16:30 - 19:30 UTC | Bloomington Branch, 1204 N Loesch Rd, Bloomington, IN, 47404, United States
PRODIGY PLUS TECHNICAL TRAINING & MERIDIAN DISPENSER INTRODUCTION CLASS
Instructor: LESTER TATUM / Scotsman National Service Manager
Class Time: 4:30 – 7:30 PM
Cost: $35.00 per attendee
CLICK HERE for Registration Form
Meridian Topics Include:
– Introduction
– Maintenance
– Diagnostics
Prodigy Plus Topics Include:
– Prodigy Plus Improvements
– Maintenance
– Troubleshooting
– Tricks and Tips for easier service diagnosis
***Cancellations must be made 24 hours prior to training date. Failure to do so will result in full charge of class.***

Scotsman Training - Indianapolis
2018-12-05 16:30 - 19:30 UTC

Hydrocarbon Training - Indianapolis
2018-12-13 17:30 - 19:00 UTC
HYDROCARBON TRAINING
Includes RSES Training Manual
CLICK HERE to download the registration form
Training Cost: $95.00 per person
Registration Deadline: Monday, December 3rd

Return Registration to:
training@duncansupply.com
or by fax (317) 264-6689
TOPICS COVERED IN THIS SEMINAR:
• Regulations and Standards
• Hydrocarbon Safety
• Compressor Terminal Venting
• System Flushing, Purging, and Pressure Testing for Leaks
• Compressor Misuse
• Service Procedures, Maintenance and Refrigerant Handling
• The Refrigerant Cycle
• Temperature Pressure Charts
• SNAP Appendix: Substitutes Subject to Use Restrictions

Level 1 - Duncan Supply Technical Education Training Program - Fort Wayne
2019-01-28 18:00 - 21:30 UTC | Branch Locations
Duncan Supply Technical Education Training Program – Fort Wayne
Monday, January 28th – Wednesday, April 10th
Duncan Supply Fort Wayne Branch
CLICK HERE to download the flyer

Level 1 - Duncan Supply Technical Education Training Program - Kokomo
2019-01-28 18:00 - 21:30 UTC | Kokomo Branch, 1100 S. Ohio St, Kokomo, IN, 46902, United States
Duncan Supply Technical Education Training Program – Kokomo
Monday, January 28th – Wednesday, April 10th
Duncan Supply Kokomo Branch
CLICK HERE to download the flyer

Level 2 - Duncan Supply Technical Education Training Program - Indianapolis
2019-01-28 18:00 - 21:30 UTC
Duncan Supply Technical Education Training Program – Indianapolis
Monday, January 28th – Thursday, April 10th
Duncan Supply Indianapolis Branch
CLICK HERE to download the flyer

Level 2 - Duncan Supply Technical Education Training Program - Fort Wayne
2019-01-29 18:00 - 21:30 UTC | Branch Locations
Duncan Supply Technical Education Training Program – Fort Wayne
Tuesday, January 29th – Thursday, April 11th
Duncan Supply Fort Wayne Branch
CLICK HERE to download the flyer

Level 1 - Duncan Supply Technical Education Training Program - Indianapolis
2019-02-05 18:00 - 21:30 UTC | Area 31, 1155 S. High School Rd., Indianapolis, IN, 46241, United States
Duncan Supply Technical Education Training Program- Indianapolis
Tuesday, February 5th – Thursday, April 25th
Ben Davis Area 31 Career Center (Indianapolis)
CLICK HERE to download the flyer
*Apply at – www.adulted.info.careers

American Standard Dealer Awards Banquet
2019-02-16 17:00 - 21:00 UTC | Intermatic-logo_HP
OPEN TO AMERICAN STANDARD DEALERS ONLY
See your Territory Manager for details!

American Standard Dealer Incentive Trip - Cruise on Freedom of the Seas
2019-02-17 - 2019-02-24 | Bloom
OPEN TO AMERICAN STANDARD DEALERS ONLY
Please see your Territory Manager for details!

Century Commercial & ECM Motors - Indianapolis
2019-02-20 09:00 - 13:00 UTC
CENTURY COMMERCIAL & ECM MOTORS

Wednesday, February 20th, 2019
9am – 1pm

Duncan Supply Co., Inc.
910 N Illinois St. (Bldg #5)
Indianapolis, IN

$70 per person
(lunch provided)

*Allows for 3 NATE re-certification hours

CLICK HERE for Registration Flyer

Topics Covered In This Seminar:
-Motors 101 & Commercial Applications
-Draft Inducers
-Introduction to ECM
-Introduction to Airflow
-In-depth Look at ECM
-Diagnosing ECM
-Replacing ECM – OEM vs. Generic
-Upgrading existing PSC to ECM and Sales Opportunity

Heatcraft - Basic Refrigeration Principles - Fort Wayne
2019-02-21 08:00 - 12:00 UTC | Branch Locations
Heatcraft Basic Refrigeration Principles
Thursday, February 21st, 2019
8am – 12pm

Duncan Supply Co., Inc.
6821 Metro Park Dr.
Fort Wayne, IN

$25 per person
(lunch provided 12-1pm)

CLICK HERE for Registration Flyer

Topics Covered In This Seminar:
-What is refrigeration
-System Components
-Refrigeration Process

Heatcraft - Intermediate Refrigeration Principles - Fort Wayne
2019-02-21 13:00 - 17:00 UTC | Branch Locations
Heatcraft Intermediate Refrigeration Principles

Thursday, February 21st, 2019
1pm – 5pm

Duncan Supply Co., Inc.
6821 Metro Park Dr.
Fort Wayne, IN

$25 per person
(lunch provided from 12-1pm)

CLICK HERE for Registration Flyer

Topics Covered In This Seminar:

-Using Engineering Manual
-Equipment Selection
-Pipe Sizing
-Expansion Valve Selection and Installation
-Principles of Refrigeration Load Calculations

Scroll & Reciprocating Compressor Troubleshooting - Indianapolis
2019-03-05 15:00 - 19:00 (America/Indiana/Indianapolis)
Scroll & Reciprocating Compressor Troubleshooting
with Mike Prokup
Tuesday, March 5th 2019
Class: 3:00 p.m. – 7:00 p.m.
Click Here to Register
Note: This course allows for 4 hours toward NATE re-certification.
This course will cover:

Understanding compressor operating performance curves
Compressor application limits and how they affect compressor operation
(Electrical & Mechanical)
Compressor starting circuits: Operation and Testing
Single phase motor winding test procedures
Mechanical compressor test procedures
Troubleshooting the two step scroll
Identifying line voltage conditions that lead to compressor problems
Application of aftermarket start components
Causes of run capacitor failure
Replacement procedure for burn outs

Oops! We could not locate your form.

Solving Air Volume Problems - Indianapolis
2019-03-12 08:30 - 16:00 (America/Indiana/Indianapolis)
Solving Air Volume Problems
with Mike Prokup
Tuesday, March 12th
Class: 8:30 a.m. – 4:00 p.m
Click Here to Register
Note: This course allows for 5.5 hours toward NATE re-certification
This course will cover:

Air volume requirements for HVAC equipment (understanding Air Volume Tables)
External Static Pressure
Measuring External Static Pressure
PSC Fan Performance and External Static Pressure
Elements that cause changes in External Static Pressure
Changing External Static Pressure and Fan Laws
Causes of Low Air Volume at Air Handler/Furnace
How to increase air volume
Introduction to Manual D Duct Design
Common Duct Fittings and Total Effective Length of Duct Systems
Correcting Duct System Problems That Are Causing High Static
Measuring Air Volume in Duct Zones
ECM Motors and Duct Static Pressure Limits/Operation
Identifying Causes of Low Air Volume asking Corrections

Appion Best Practice Recovery and Evaluation Speed Up - KOKOMO
2019-03-12 09:00 - 11:00 (America/Indiana/Indianapolis) | Kokomo Branch, 1100 S. Ohio St, Kokomo, IN, 46902, United States
APPION
Best Practice Recovery & Evacuation Speed Up
Tuesday, March 12th, 2019
9am – 11am

Duncan Supply Co., Inc.
1100 S Ohio St
Kokomo, IN

CLICK HERE to Register

Appion Best Practice Recovery and Evaluation Speed Up - LAFAYETTE
2019-03-12 16:00 - 18:00 (America/Indiana/Indianapolis) | Chemours-logo_new_HP
APPION
Best Practice Recovery & Evacuation Speed Up
Tuesday, March 12th, 2019
4pm – 6pm

Courtyard
150 Fairington Ave
Lafayette, IN 47905

CLICK HERE to Register

Packard - Rectroseal Counter Day - Indianapolis
2019-03-13 11:00 - 14:00 (America/Indiana/Indianapolis)

Champaign Vendor Show - Champaign
2019-03-13 12:00 - 20:00 (America/Indiana/Indianapolis) | Holiday Inn Champaign Suites, 101 Trade Center Drive, Champaign, IL, 61820, United States
Duncan 2019 Champaign Vendor Trade Show Conference
March 13, 2019
12:00 PM – 8:00 PM
Holiday Inn Champaign Suites
101 Trade Center Drive
Champaign, IL 61820
Trade Conference Workshops: Registration is required for each workshop you plan to attend!

Click Here to Register

Appion Best Practice Recovery and Evaluation Speed Up - TERRE HAUTE
2019-03-14 16:00 - 18:00 (America/Indiana/Indianapolis) | Terre Haute Branch, 1000 E. Ohio St, Terre Haute, IN, 47808, United States
APPION
Best Practice Recovery & Evacuation Speed Up
Thursday, March 14th, 2019
4pm – 6pm

Duncan Supply Co., Inc.
1000 E Ohio St
Terre Haute, IN

CLICK HERE to Register

Appion Best Practice Recovery and Evaluation Speed Up - FORT WAYNE
2019-03-19 09:00 - 11:00 (America/Indiana/Indianapolis) | Branch Locations
APPION
Best Practice Recovery & Evacuation Speed Up
Tuesday, March 19th, 2019
9am – 11am

Duncan Supply Co., Inc.
6821 Metro Park Dr
Fort Wayne, IN

Click Here to Register

American Standard Spring Marketing Meeting - Indianapolis/Plainfield
2019-03-19 09:00 - 16:00 (America/Indiana/Indianapolis)
American Standard Dealers Only
Duncan Supply would like to invite you to the 2019 Spring Marketing Meetings.
We have a lot to talk about!
Indianapolis: Tuesday, March 19th from 9 AM until 4 PM
Plainfield Conference Center
(6089 Clarks Creek Rd, Plainfield, IN 46168)
Click Here to Register

Appion Best Practice Recovery and Evaluation Speed Up - ELKHART
2019-03-19 16:00 - 18:00 (America/Indiana/Indianapolis) | CPS-logo_HP
APPION
Best Practice Recovery & Evacuation Speed Up
Tuesday, March 19th, 2019
4pm – 6pm

Baymont Inn
3010 Brittany Ct
Elkhart, IN 46514

CLICK HERE to Register

American Standard Spring Marketing Meeting - Warsaw
2019-03-20 09:00 - 16:00 (America/Indiana/Indianapolis) | Wyndham Garden Warsaw, 2519 E. Center St., Warsaw, 46580
American Standard Dealers Only
Duncan Supply would like to invite you to the 2019 Spring Marketing Meetings.
We have a lot to talk about!
Warsaw: Wednesday, March 20th from 9 AM until 4 PM
Wyndham Garden Inn
(2519 E Center St., Warsaw, IN 46580)
Click Here to Register

Appion Best Practice Recovery and Evaluation Speed Up - INDIANAPOLIS
2019-03-21 09:00 - 11:00 (America/Indiana/Indianapolis)
APPION
Best Practice Recovery & Evacuation Speed Up
Thursday, March 21st, 2019
9am – 11am

Duncan Supply Co., Inc.
910 N Illinois St
Indianapolis, IN

CLICK HERE to Register

Appion Best Practice Recovery and Evaluation Speed Up - Bloomington
2019-03-21 16:00 - 18:00 (America/Indiana/Indianapolis) | Bloomington Branch, 1204 N Loesch Rd, Bloomington, IN, 47404, United States
APPION
Best Practice Recovery & Evacuation Speed Up
Thursday, March 21st, 2019
4pm – 6pm

Duncan Supply Co., Inc.
1204 N Loesch Rd
Bloomington, IN

CLICK HERE to Register

Core Refrigeration - Indianapolis
2019-03-26 16:00 - 2019-03-27 19:00 (America/Indiana/Indianapolis)
Core Refrigeration
with Mike Prokup
Thurs., March 26th & Fri., March 27th
Class: 4:00 p.m. – 7:00 p.m. (both days)
CLICK HERE to Register
Note: This course allows for 5 hours toward NATE re-certification
This course will cover:

Air properties and their influence upon the refrigeration system
Why evaporator coil matches are critical
How to calculate the theoretical capacity of a saturated refrigeration cycle
How suction pressure and discharge pressure changes affect the system capacity
How TXV metering provides better overall control
How suction lines drop system capacity
Troubleshooting the evaporator circuit using suction vapor superheat measurements
Identifying metering piston problems
Diagnostic test procedure: TXV and EEV
Suction line sizing procedures
Troubleshooting condenser coil circuits including parallel and subcooling loops
Liquid subcooling levels
Liquid line sizing, lift and distance limits
Pressure drop limits and identifying restrictions
Charge procedures for fixed and TXV systems
Analyzing the complete system & making a confident diagnosis
Evacuation procedure

Core Refrigeration - Champaign
2019-03-28 08:30 - 15:00 (America/Indiana/Indianapolis) | Holiday Inn Champaign Suites, 101 Trade Center Drive, Champaign, IL, 61820, United States
Core Refrigeration
with Mike Prokup
Thursday March 28th
Class: 8:30am – 3:00pm
Click Here to Register
Note: This course allows for 5 hours toward NATE re-certification
This course will cover:

Air properties and their influence upon the refrigeration system
Why evaporator coil matches are critical
How to calculate the theoretical capacity of a saturated refrigeration cycle
How suction pressure and discharge pressure changes affect the system capacity
How TXV metering provides better overall control
How suction lines drop system capacity
Troubleshooting the evaporator circuit using suction vapor superheat measurements
Identifying metering piston problems
Diagnostic test procedure: TXV and EEV
Suction line sizing procedures
Troubleshooting condenser coil circuits including parallel and subcooling loops
Liquid subcooling levels
Liquid line sizing, lift and distance limits
Pressure drop limits and identifying restrictions
Charge procedures for fixed and TXV systems
Analyzing the complete system & making a confident diagnosis
Evacuation procedure

Chemours - R-22 Refrigeration Replacement - Indianapolis
2019-04-04 09:00 - 11:00 (America/Indiana/Indianapolis)
Chemours
R-22 Refrigeration Replacement
Thursday, April 4th, 2019
9am – 11am

Duncan Supply Co., Inc.
910 N Illinois St
Indianapolis, IN 46204

CLICK HERE to Register

Chemours - R-22 Refrigeration Replacement - Bloomington
2019-04-04 16:00 - 18:00 UTC | Bloomington Branch, 1204 N Loesch Rd, Bloomington, IN, 47404, United States
Chemours
R-22 Refrigeration Replacement
Thursday, April 4th, 2019
4pm – 6pm

Duncan Supply Co., Inc.
1204 N Loesch Rd
Bloomington, IN 47404

CLICK HERE to Register
