Hydronics Training - South Bend
2019-09-26 09:00 - 16:00 (America/Indiana/Indianapolis) | Comfort Suites – South Bend, 60971 US 31 South, South Bend, IN, 46614, United States
Hydronics Training
4 hours towards NATE re-certification

Cost: $40.00 per attendee*
*Early Bird Special: Register by Friday, September 6th and receive $10.00 off per attendee
Thursday, September 26th (9:00 AM – 4:00 PM)
*includes breakfast and lunch

Click Here to download the registration form
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689

Training Topics

· New boiler piping techniques
· All the upcoming changes in the industry going from cast iron to copper fin and stainless steel heat exchangers
· How to select the proper size of boiler, indirect tanks and buffer tanks
· Makeup air testing
· Primary and secondary piping
· Correct venting practices
· How to measure fin tube and radiation for proper sizing
· Proper installing techniques
· Units on site for “Live Fire” and service demonstration
· Radiant heat products
· Tools
· Argo controls and where to use them

Yellow Jacket, MA-Line, Lucas Milhaupt Counter Day - Plainfield
2019-09-26 11:00 - 14:00 | Plainfield Distribution Center, 2191 Airwest Blvd, Plainfield, IN, 46168, United States
Join us September 26th for lunch at this Counter Day presented by Joel Sasse for Yellow Jacket, MA-Line, and Lucas Milhaupt.

CLICK HERE for Event Flyer.

Everpure Reverse Osmosis Technical Training - Fort Wayne
2019-09-26 16:30 - 19:30 | Branch Locations
EVERPURE REVERSE OSMOSIS TECHNICAL TRAINING
The instructor will be installing and troubleshooting
a Reverse Osmosis install.

Wednesday September 25th & Thursday September 26th

Cost: $35.00 per attendee*
*Includes dinner both nights
*** TRAINEES MUST ATTEND BOTH NIGHTS ***

CLICK HERE to download the registration form
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689

Level 1 - Duncan Supply Technical Education Training Program - Fort Wayne
2019-09-30 18:00 - 21:30 | Branch Locations
Duncan Supply Technical Education Training Program – Fort Wayne
Monday, September 30th – Wednesday, December 11th
Duncan Supply Fort Wayne Branch
CLICK HERE to download the flyer

Level 1 - Duncan Supply Technical Education Training Program - Kokomo
2019-09-30 18:00 - 21:30 | Kokomo Branch, 1100 S. Ohio St, Kokomo, IN, 46902, United States
Duncan Supply Technical Education Training Program – Kokomo
Monday, September 30th – Wednesday, December 11th
Duncan Supply Kokomo Branch
CLICK HERE to download the flyer

US Motors Counter Day - Bloomington
2019-10-01 11:00 - 14:00 | Bloomington Branch, 1204 N Loesch Rd, Bloomington, IN, 47404, United States
Join us October 1st for lunch at this Counter Day presented by Joe LaBonte for US Motors.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Terre Haute
2019-10-01 15:00 - 19:00 | Holiday Inn Terre Haute, 3300 US Hwy 41 South, Terre Haute, IN, 47802, United States
Technical Services Training – Fall 2019
Tuesday, October 1st
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

Level 2 - Duncan Supply Technical Education Training Program - Fort Wayne
2019-10-01 18:00 - 21:30 | Branch Locations
Duncan Supply Technical Education Training Program – Fort Wayne
Tuesday, October 1st – Thursday, December 12th
Duncan Supply Fort Wayne Branch
CLICK HERE to download the flyer

Level 2 - Duncan Supply Technical Education Training Program - Kokomo
2019-10-01 18:00 - 21:30 | Kokomo Branch, 1100 S. Ohio St, Kokomo, IN, 46902, United States
Duncan Supply Technical Education Training Program – Kokomo
Tuesday, October 1st – Thursday, December 12th
Duncan Supply Kokomo Branch
CLICK HERE to download the flyer

Level 2 - Duncan Supply Technical Education Training Program - Indianapolis
2019-10-01 18:00 - 21:30
Duncan Supply Technical Education Training Program – Indianapolis
Tuesday, October 1st – Thursday, December 12th
Duncan Supply Indianapolis Branch
CLICK HERE to download the flyer

US Motors Counter Day - Indianapolis
2019-10-02 11:00 - 14:00 | Bloom
Join us October 2nd for lunch at this Counter Day presented by Joe LaBonte for US Motors.

CLICK HERE for Event Flyer.

US Motors Counter Day - Plainfield
2019-10-03 11:00 - 14:00 | Plainfield Distribution Center, 2191 Airwest Blvd, Plainfield, IN, 46168, United States
Join us October 3rd for lunch at this Counter Day presented by Joe LaBonte for US Motors.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Champaign
2019-10-03 15:00 - 19:00 | Holiday Inn Champaign Suites, 101 Trade Center Drive, Champaign, IL, 61820, United States
Technical Services Training – Fall 2019
Thursday, October 3rd
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

US Motors Counter Day - Lafayette
2019-10-04 11:00 - 14:00 | Lafayette Branch, 510 Morland Dr, Lafayette, IN, 47905, United States
Join us October 4th for lunch at this Counter Day presented by Joe LaBonte for US Motors.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Lafayette
2019-10-08 15:00 - 19:00 | Double Tree by Hilton Lafayette, 155 Progress Dr, Lafayette, IN, 47905, United States
Technical Services Training – Fall 2019
Tuesday, October 8th
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

Veto Pro Pac & MARS Motors Counter Day - Indianapolis
2019-10-09 11:00 - 14:00 | Bloom
Join us October 9th for lunch at this Counter Day presented by Phil Buehler for Veto Pro Pac and MARS Motors.

CLICK HERE for Event Flyer.

Yellow Jacket, MA-Line, Lucas Milhaupt Counter Day - Fort Wayne
2019-10-10 11:00 - 13:00 | Branch Locations
Join us October 10th for Pork Burgers at this Counter Day presented by Joel Sasse for Yellow Jacket, MA-Line, and Lucas Milhaupt.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Indianapolis
2019-10-10 15:00 - 19:00 | Intermatic-logo_HP
Technical Services Training – Fall 2019
Thursday, October 10th
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

Fall Technical Services Training - South Bend
2019-10-15 15:00 - 19:00 | Comfort Suites – South Bend, 60971 US 31 South, South Bend, IN, 46614, United States
Technical Services Training – Fall 2019
Tuesday, October 15th
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

Yellow Jacket, MA-Line, Lucas Milhaupt Counter Day - Indianapolis
2019-10-16 11:00 - 14:00 | Bloom
Join us October 16th for lunch at this Counter Day presented by Joel Sasse for Yellow Jacket, MA-Line, and Lucas Milhaupt.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Fort Wayne
2019-10-17 15:00 - 19:00 | Don Hall’s Guest House, 1313 W. Washington Center Rd., Fort Wayne, IN, 46818, United States
Technical Services Training – Fall 2019
Thursday, October 17th
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

Yellow Jacket, MA-Line, Lucas Milhaupt Counter Day - Lafayette
2019-10-18 11:00 - 14:00 | Lafayette Branch, 510 Morland Dr, Lafayette, IN, 47905, United States
Join us October 18th for lunch at this Counter Day presented by Joel Sasse for Yellow Jacket, MA-Line, and Lucas Milhaupt.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Bloomington
2019-10-22 15:00 - 19:00 | CalgonFV
Technical Services Training – Fall 2019
Tuesday, October 22nd
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

LG Residential / Light Commercial Ductless Installation & Application Training - Fort Wayne
2019-10-22 15:00 - 19:00 | Don Hall’s Guest House, 1313 W. Washington Center Rd., Fort Wayne, IN, 46818, United States
LG Residential / Light Commercial Ductless Installation & Application Training
Tuesday, October 22nd
3:00 PM – 7:00 PM

Cost: $45.00 per attendee
*dinner included

Recommended Experience:
•Basic understanding of HVAC / mini splits

Training Overview:
• Understanding LG inverters
• Application considerations and strategies
• Installation considerations and tips

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Tuesday, October 15th, 2019

Moore Sales Counter Day - Indianapolis
2019-10-23 11:00 - 14:00 | Bloom
Join us October 23rd for Smoked meat at this Counter Day presented by Matt Moore for Moore Sales.

CLICK HERE for Event Flyer.

Fall Technical Services Training - Indianapolis
2019-10-24 15:00 - 19:00 | Intermatic-logo_HP
Technical Services Training – Fall 2019
Thursday, October 24th
3:00 PM – 7:00 PM
*Dinner at 5:00 PM

Cost: $95.00 first attendee, $65.00 each additional technician

Topics Covered:
• New S9x1 & s9B1, s9X2 Single & Two Stage 34″ 90%+ up to 96% AFUE Furnaces
• S8X1 & S8B1, S8x2 Single & Two Stage 34″ 80%+ AFUE Furnaces
• New ACONT724 Wi-Fi Comfort Control, A/S Controls Review
• Heat Pump Review
• Miscellaneous

Each Technical Training session will allow 3.5 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, September 25th, 2019

LG Residential / Light Commercial Ductless Installation & Application Training - South Bend
2019-10-24 15:00 - 19:00 | Comfort Suites – South Bend, 60971 US 31 South, South Bend, IN, 46614, United States
LG Residential / Light Commercial Ductless Installation & Application Training
Thursday, October 24th
3:00 PM – 7:00 PM

Cost: $45.00 per attendee
*dinner included

Recommended Experience:
•Basic understanding of HVAC / mini splits

Training Overview:
• Understanding LG inverters
• Application considerations and strategies
• Installation considerations and tips

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Tuesday, October 15th, 2019

NATE Core Review and Testing - Indianapolis
2019-10-29 08:30 - 12:00
NATE Core Review and Testing
Core Review – 8:30am
Testing – 10:00am
Duncan Supply Indianapolis – Bldg. 5
101 W. 9th Street
Indianapolis, IN 46204
NATE Training Indy 10.29.19 to Register
Registration Deadline: Friday, April 26th
Return completed registration form to:
by fax (317) 264-6689 or email
training@duncansupply.com

Variable Speed Outdoor Unit Technical Training - Fort Wayne
2019-10-29 08:30 - 16:00, 2019-10-30 08:30 - 16:00 | Don Hall’s Guest House, 1313 W. Washington Center Rd., Fort Wayne, IN, 46818, United States
Variable Speed Outdoor Unit Technical Training – Fall 2019

Tuesday, October 29th – Wednesday, October 30th
8:30 AM – 4:00 PM
*Lunch at 12:00 PM

Certification Course Test will take place on Wednesday, October 30th.

Cost: $150 per technician
*includes breakfast & lunch both days

Topics Covered:
• Sequence of Operation
• Components and Features
• Setup and Configuration
• Test Modes and Charging
• Diagnostics and Troubleshooting

Attending this session will allow each technician 8 hours toward NATE re-certification

Click Here to download the registration form*
Return registration form to:
training@duncansupply.com
or by fax (317) 264-6689
*REGISTRATION DEADLINE
Wednesday, October 23rd, 2019
